KNX аналоговый актуатор, 4 канала, артикул 2204.01REGA

• Бренд JUNG
• Страна-изготовитель Произведено в Германии

2204.01REGA Аналоговый актуатор, 4 канала, для работы аналогового вывода требуется питание 24 В АС. Необходимое питание может обеспечить блок питания арт. WSSV 10, монтаж на DIN-рейку, 4 модуля; KNX

устройство для крепления на Din-рейку, 4 установочных модуля
ETS семейство изделий: вывод
Тип продукта: аналоговый вывод, 4 канала

Для работы аналогового вывода требуется питание 24 В АС. Необходимое питание может обеспечить блок питания арт. WSSV 10.
Функция

• The analogue output converts measuring data received via KNX telegrams (1-byte and 2-byte telegrams) into analogue output signals.
• The analogue output signals enable heating, ventilation and air conditioning units to adapt their output values to information received from the bus and thus to take part in control processes.
• The outputs are software-parameterized for voltage or current signals.
  Voltage signals: 0 ... 1 V, 0 ... 10 V
  Current signals: 0 ... 20 mA, 4 ... 20 mA
• Voltage outputs are monitored for short circuits.
• The output state is indicated by status LEDs.
• With the analogue actuator module, 4-gang (ref.no. 2204.01 REGAM), the number of analog outputs can be increased from 4 to 8. The connection is made via a system plug.
• The output variables can be forced.
• Outputs that are not required can be switched off.

 
Connectable analogue actuators

• Do not connect electronic ballasts or electronic transformers with 1-10 V control input to the outputs.
• Do not connect external voltages to the outputs. All connected components must ensure safe separation from other voltages.
• Current outputs may be loaded with 500 Ω max.
• Voltage outputs must be loaded with 1 kΩ min.
• The GND terminals of the outputs K1 ... K4 are connected internally.
• In the event of a short-circuit between a voltage output K1 ... K4 and GND, the respective output is deactivated.